| General | |
|---|---|
| Case Material | Premium machined and anodized aluminium |
| Dimensions | 200 x 128 x 40mm |
| Weight | 950 g |
| Top Panel Display | Capacitive Touch, TFT LCD 800 x 480 pixels resolution 16:9 Aspect ratio |
| Rotary Encoder | Anodized aluminum + Black rubber O-ring |
| 7 x Hardware + Soft buttons | RGB LEDs |
| Bottom Panel Mic stand thread | 3/8″ 16BSW European thread incorporated Note: Americas 5/8″ 27UN adaptor not included |
| Software Specifications | |
|---|---|
| Windows Driver/OS | RAVENNA ASIO v12.0 (ASIO 2.2) for Win7-64bit / Win8.1-64bit / Win10-64bit |
| Mac Driver/OS | VAD Core Audio for MacOS 10.8.5 or higher (Intel) |
| Linux Driver/OS | ALSA Linux driver for RAVENNA/AES67 |
| ANEMAN | Version 1.1.7 and above |
| MICROPHONE INPUTS 1-2 (Combo) | |
|---|---|
| Connector Type | Combo Locking Neutrik XLR / TRS |
| Dynamic Range Mic / Mic Lift | 137 dB / 128 dB (A-weighted, typ.) |
| Max Input level Mic Pad / Mic / Mic Lift | +24 dBu / +12 dBu / +0 dBu |
| Frequency response +0/-0.2dB @ fs = 48 kHz | 9 Hz – 22 kHz |
| Frequency response +0/-3dB @ fs = 96 kHz | 9 Hz – 46 kHz |
| Frequency response +0/-3dB @ fs = 192 kHz | 11 Hz – 94 kHz |
| THD+N Preamp + A/D 1kHz @ 0 dBFS | < -110 dB (0.0003%) |
| Interchannel Crosstalk @ 1kHz | < -130 dB |
| Equivalent Input Noise Mic / Mic Lift (150Ω Source) | < -125 dBu / -128 dBu (A-weighted, typ.) |
| Common Mode Rejection Rate (20 Hz – 20 kHz) | > 80 dB |
| Input Impedance (Differential) | ~ 10kΩ |
| Gain Range (Software controlled) | 0 dB to +66 dB |
| Gain Step Coarse / Fine | 0.5 dB / 0.1 dB |
| Phantom Power (Software Switchable Per Channel) | +48V |
| Phase Reverse (Software Switchable Per Channel) | Yes |
| Low Cut filter (Software Switchable Per Channel) | -12 dB/octave, 80 Hz |
| 5° low-end in-channel Ø deviation pt: Mic | 9 Hz |
| Interchannel phase 10 Hz – 100 kHz | < ±2° |
| LINE INPUTS 1-2 (Combo) | |
|---|---|
| Connector Type | Combo Locking Neutrik XLR / TRS |
| Dynamic Range, ref +24 dBu | 139 dB (A-weighted, typ.) |
| Max Line Input Level | +24 dBu |
| Input Impedance (Differential) | ~ 10kΩ |
| THD+N Preamp + A/D 1kHz @ 0 dBFS | < – 104 dB (0.0006%) |
| Interchannel Crosstalk @ 1kHz | < -140 dB |
| Sensitivity Range for 0 dBFS (Software controlled) | +24 dBu to -42 dBu |
| Common Mode Rejection Rate (20 Hz – 20 kHz) | > 80 dB |
| 5° low-end in-channel Ø deviation pt: Line | 9 Hz |
| Interchannel phase 10 Hz – 100 kHz | < ±2° |
| INSTRUMENTS / Hi-Z & LINE INPUTS 3-4 | |
|---|---|
| Connector Type | ¼” TRS Female |
| Dynamic Range, ref +18 dBu | 136 dB (A-weighted, typ.) |
| Max Input Level | +18 dBu |
| Input Impedance (Single ended / Differential) | ~ 1MΩ / ~ 2MΩ |
| Gain Range (Software controlled) | 0 dB to +66 dB |
| THD+N Preamp + A/D 1kHz @ 0 dBFS | < – 111 dB (0.0003%) |
| Interchannel Crosstalk @ 1kHz | < -150 dB |
| Sensitivity Range for 0 dBFS (software controlled) | +18 dBu to -48 dBu |
| Common Mode Rejection Rate (20 Hz – 20 kHz) | > 70 dB |
| 5° low-end in-channel Ø deviation pt: Inst/Line | 2 Hz |
| Interchannel phase 10 Hz – 100 kHz | < ±1° |
| MAIN OUTPUTS 1-2 | |
|---|---|
| Connector Type | Neutrik XLR Male |
| Dynamic Range | 123 dB (A-weighted, typ.) |
| Max output Level (Differential / Single ended) | +24 dBu (12.2 Vrms) / +18 dBu (6.1 Vrms) |
| Frequency response +0/-0.2dB @ fs = 48 kHz | 6 Hz – 22 kHz |
| Frequency response +0/-3dB @ fs = 96 kHz | 2 Hz – 46 kHz |
| Frequency response +0/-3dB @ fs = 192 kHz | 2 Hz – 92 kHz |
| Output Impedance | < 70Ω |
| THD+N 1 kHz @ 0 dBFS | < – 110 dB (0.0003%) |
| Output Level Matching | ±0.01 dB |
| Attenuation Range (Software controlled) | – ∞ dB to 0 dB |
| Gain Step / Precision | 0.5 dB / ±0.05 dB |
| LINE OUTPUTS 3-4 | |
|---|---|
| Connector Type | ¼” TRS Female |
| Dynamic Range | 123 dB (A-weighted, typ.) |
| Max output Level (Differential / Single ended) | +24 dBu (12.2 Vrms) / +18 dBu (6.1 Vrms) |
| Output Impedance | < 70Ω |
| THD+N 1 kHz @ 0 dBFS | < – 110 dB (0.0003%) |
| Output Level Matching | ±0.01 dB |
| Attenuation Range (Software controlled) | – ∞ dB to 0 dB |
| Gain Step / Precision | 0.5 dB / ±0.05 dB |
| HEADPHONES | |
|---|---|
| Headphone Jacks | 2 Independent ¼” TRS Female Stereo 6.3 mm |
| Dynamic Range (A-weighted, typ.) High / Low | < -122 dB / – 117 dB |
| Max output Level High / Low | 17.1 dBu / 7.8 dBu |
| Frequency response +0/-0.2dB @ fs = 48 kHz | 6 Hz – 22 kHz |
| Frequency response +0/-3dB @ fs = 96 kHz | 2 Hz – 46 kHz |
| Frequency response +0/-3dB @ fs = 192 kHz | 2 Hz – 92 kHz |
| Output Impedance | < 0.035Ω |
| THD+N 1 kHz @ 0 dBFS High / Low | < -108 dB (0.00039%) / -110 dB (0.0003%) |
| Attenuation Range (Software controlled) | – ∞ dB to 0 dB |
| Gain Step / Precision | 0.5 dB / ±0.05 dB |
| A/D – D/A CONVERSION | |
|---|---|
| Supported Sample Rates PRO | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz |
| Supported Sample Rates PREMIUM | 44.1 kHz up to 352.8 kHz (DXD), 384 kHz, DSD64, DSD128 & DSD256 |
| Bit Depth Per Sample | 32 |
| A/D Latency Sharp Short delay @ 44.1kHz to 96kHz | 5 samples |
| A/D Latency Sharp Short delay @ 174.6kHz to 192kHz | 6 samples |
| A/D Latency Sharp Short delay @ 352.8kHz to 384kHz | 7 samples |
| D/A Latency Sharp @ 44.1kHz to 384kHz | 35 samples |
| D/A Latency Slow @ 44.1kHz to 384kHz | 9 samples |
| D/A Latency Apodizing @ 44.1kHz to 384kHz | 35 samples |
| D/A Latency Brickwall @ 44.1kHz to 384kHz | 35 samples |
| COMPLEMENTARY I/O | |
|---|---|
| RAVENNA/AES67 (Gigabit Ethernet) | Locking EtherCON compatible with standard RJ45 connectors |
| Built-in Talkback microphone | Mono omnidirectional condenser capsule |
| GPI/MIDI Input | ¼” TRS Female |
| GPO/MIDI Output | ¼” TRS Female |
| POWER | |
|---|---|
| Power Supply Voltage (DC) | 9V to 15V DC |
| Power Supply Connector Type | Barrel jack, int. 2.5mm/out. 5.5mm, with locking function |
| Power Consumption (Typ.) | 15W |
| P-o-E (Power Over Ethernet) | IEEE 802.3at (PoE+) class 0 Power-over-Ethernet standard |
